Products

Back to Products


All Products

Digital Home Systems offers a variety of products to facilitate a simple or complex smart home solution. DHS offers a wide range of products for builders, installers and resellers who are providing Smart Home solutions for old/new home improvements, renovations or retail distribution.

If you represent a company operating in the Home or Commercial Automation industry and are interested in selling or installing reliable, secure, wireless and affordable Z-Wave technology, contact us today.

Products:

AEOTEC D/W Sensor

AEOTEC D/W Sensor

The AEOTEC Door/Window Sensor 6 is the first security sensor of its kind, designed to be minimal, invisible and paintable.It's inbuilt battery means you can easily detach it from the door or window to recharge it via USB. The AEOTEC Door/Window Sensor 6 fills the traditional role of a security and safety sensor, providing a Z-Wave or Z-Wave Plus network with crucial door opened/closed information without compromising on the style and aesthetics of your home. Z-Wave Plus certified, the AEOTEC Door/Window Sensor 6 is compatible with all certified Z-Wave gateways including Control4 (Z-Wave enabled), HomeSeer, Indigo for Mac, and Vera Edge/VeraPlus/VeraSecure Controllers.

AEOTEC Dimmer Bypass

AEOTEC Dimmer Bypass

Stop dimmed lights flickering.

Dimming energy-saving lights is complicated – there’s a lot of different technologies built into modern bulbs.
That’s why dimmed lights sometimes flicker or remain on – power trickles through. The AEOTEC Dimmer Bypass works with the AEOTEC Nano Dimmer to remove the signals from your power line that cause low-watt lightbulbs to flicker.

AEOTEC Flood Sensor 6

AEOTEC Flood Sensor 6

Flood sensor. Leak sensor. Safety sensor. Water Sensor 6. Your home’s 6th sense.The Water Sensor 6 changes uses Z-Wave Plus to silently monitor areas of your home at risk of water and then takes action when the worst occurs.

Water Sensor 6 can detect minuscule amounts of water – as little as 0.5mm / 0.02” of water. That makes it your first line of defence against damaged plumbing. Whether a small amount or large, Water Sensor 6 also is perfect at protecting against the floods you can anticipate, such as sumps and in basements.

AEOTEC Flood Sensor Dock

AEOTEC Flood Sensor Dock

Water Sensor 6 protects your home from leaks and floods in the easiest of ways. Dock is a pro-tool that dramatically enhances the most important features of Water Sensor 6. With Dock and Water Sensor 6 combined, your home is protected by the most advanced Z-Wave flood sensor available.

Connect 1 or 2 of the provided spot sensors to Dock to monitor for leaks up to 1 metre away from Water Sensor 6. Dock enhances Water Sensor 6 to be able to monitor 2 separate areas using spot sensors. Connect a lasso sensor to encircle and monitor an entire area such as a hot water boiler. 

AEOTEC LED (Edison mount)

AEOTEC LED (Edison mount)

Intelligent, Z-Wave lighting is finally made simple. With RGBW LED Bulb from Aeotec, Z-Wave lighting control moves from the hard-wired switch and direct to an easily installed bulb. Easy is the key word. Easy to integrate. Easy to install. Easy to operate. Easy to dim. LED Bulb removes all the compatibility issues that are a part of other Z-Wave lighting solutions, building all the control and technology right into the bulb. And it does so at a very high quality. LED Bulb outputs perfect pure white light. That perfect quality light is measured at 750 lumens and is completely dimmable making LED Bulb easy to install and beautiful to be hold.

AEOTEC Multisensor 6

AEOTEC Multisensor 6

Motion for security. Motion for presence. Motion for management. The AETOEC MultiSensor 6 is perfect for more than just an intelligent security system. With a 5 metre range and a 120° field of view, the AEOTEC MultiSensor 6 captures motion data that can be used for everything from security to heating management to energy saving. 

AEOTEC MultiSensor Recessor

AEOTEC MultiSensor Recessor

Invisible sensors. Smart sensors. A smart home should be intelligent and it should be invisible. Recessor is the realisation of that principle. It connects to the AEOTEC MultiSensor 6 and AEOTEC TriSensor allowing either to be seamlessly installed and recessed within a wall or ceiling space. Recessor makes Z-Wave multi-sensors subtle.

AEOTEC Nano Dbl Switch InWall

AEOTEC Nano Dbl Switch InWall

The AEOTEC Nano Switch offers total control, easily. Impossibly small, each AEOTEC Dual Nano Switch installs invisibly behind any of your home’s existing switches or power sockets. Simply unscrew the faceplate, install the AEOTEC Nano Switch behind it, and you now have complete wireless control. Your old switches are instantly modern and instantly connected.

AEOTEC Nano Dimmer InWall

AEOTEC Nano Dimmer InWall

The AEOTEC Nano Dimmer InWall dramatically improves the lighting in your home. Aeotec 3rd generation of invisible lighting controller outperforms all that has come before it. Dimming is smoother. Compatibility is broader. Lighting is faster and more responsive. Automation and intelligence have never been more powerful. And it comes in such a small size, that you’ll be amazed at just how much functionality we were able to craft inside.

AEOTEC Nano Sgl Switch InWall

AEOTEC Nano Sgl Switch InWall

The AEOTEC Nano Switch offers total control, easily. Impossibly small, each AEOTEC Nano Switch installs invisibly behind any of your home’s existing switches or power sockets. Simply unscrew the faceplate, install the AEOTEC Nano Switch behind it, and you now have complete wireless control. Your old switches are instantly modern and instantly connected.

AEOTEC Range Extender

AEOTEC Range Extender

The Range Extender 6 keeps it reliable. We all know how annoying weak wireless signals can be. The Range Extender 6 from Aeotec ensures that your connected home stays connected. It intelligently listens to the commands and reports that your Z-Wave network sends, actively capturing weak signals and then amplifying and repeating them.

AEOTEC Recessed D/W Sen

AEOTEC Recessed D/W Sen

At less than 0.4” in width some might call it small and compact. We prefer to call it invisible. It’s the Z-Wave door sensor that’s been designed as the door sensor should have always been. Powerful but invisible. Recessed Door Sensor is a clever piece of technology that installs simply within your door’s frame. It’s as beautiful as the rest of your home. You never see it; you just feel its benefits.

AEOTEC Smart Switch

AEOTEC Smart Switch

Control any switch. From anywhere. Wirelessly.
Power sockets and light switches: amazing inventions. They literally changed the world. But if you’re not standing right next to them or can’t reach them, they’re limited. No more. The future is smarter. So is your home. The Aeotec Smart Switch 6 offers completely wireless control of your switches and sockets.

AEOTEC WallMote Double

AEOTEC WallMote Double

WallMote is the wall switch that you can install anywhere. Wirelessly. WallMote is the wall switch for anywhere because of it is simple to install. WallMote’s mounting plate affixes to any wall or surface using custom mounting tape. Peel. Stick. Done. Because WallMote communicates directly with your Z-Wave gateway, it can be used to control anything that your gateway can.

AEOTEC WallMote Quad

AEOTEC WallMote Quad

The AEOTEC WallMote is the wall switch that you can install anywhere. Wirelessly.
Whatever the room, whatever the wall, the AEOTEC WallMote is perfect. It is the wireless, Z-Wave wall switch that you can place anywhere, on any wall, with as little as double sided tape. Unpack it. Stick it. Charge it. Control is just a tap away.

AEOTEC Z-Wave Garage Door Controller

AEOTEC Z-Wave Garage Door Controller

Aeotec’s Garage Door Controller brings the intelligence of the connected-home and Z-Wave to your motorised garage door. Easily connected to your door’s existing motor, Garage Door Controller enhances it with a suite of security and safety sensors. Monitor and control your garage door via a smart phone and an Internet connected Z-Wave hub from anywhere in the world. 

AEOTEC Z-Wave USB Stick

AEOTEC Z-Wave USB Stick

The Aeotec Z-Stick (Gen 5) is a self-powered Z-Wave USB dongle with portable push-button inclusion for Z-Wave devices (independent from external power and host microprocessor). When attached to a host processor (PC etc), it becomes a Z-Wave communication device, which allows Z-Wave software to communicate with your Z-Wave devices. With Z-Stick Gen5 you’ll be able to create your own Z-Wave hub using readily available, and sometimes free, home automation software.

CoolLinkBridge Actron

CoolLinkBridge Actron

The CooLinkBridge enables integration of the ActronAir systems with Home Automation and BMS (Building Management System) controllers.The CooLinkBridge enables integration of the ActronAir systems with Home Automation and BMS (Building Management System) controllers.When controlling the ActronAir systems through the CooLinkBridge, the user is able to control the AC unit and each zone as if it was a separate Indoor unit.The CooLinkBridge comprise of the following capabilities and interfaces:

• RS232 (ASCII)
• RS485 Modbus RTU (according to the EIA/TIA-485 standard), BACnet MSTP
• Ethernet (ASCII, Modbus IP, REST, BACnet IP) for control and monitoring of the HVAC system’s operation
• KNX (Optional).
• Remote access via smart phone, tablet or PC using the CoolRemote cloud application

CoolLinkHub

CoolLinkHub

CoolPlug and CooLinkHub are CoolAutomation gateway solution to help you remotely access and control Multi-split and split air conditioning systems. The solution enables simple integration with Home Automation and Smart Home devices.The gateway supports HVAC professionals striving to deliver a great customer experience and Home Automation integrators needing to save time on complex HVAC integration.

CoolPlug is brand specific and currently supports the following brands:

Daikin KRP(P1P2)
Mitsubishi Electric
Hitachi
LG
Panasonic/Sanyo (for ducted systems)
Daikin Siesta
Mitsubishi Heavy Industries
Fujitsu
Toshiba (for ducted only)

CoolMasterNet HVAC Interface

CoolMasterNet HVAC Interface

CoolMasterNet is a universal communication bridge that allows VRF/VRV heating, ventilation, and air conditioning systems connectivity. Furthermore, the solution enables integration to centralized control systems, such as home automation, voice control devices and remote control mobile app.

Use CoolMasterNet and allow your customers to control their high-quality air conditioning system via a single home automation control panel. Bypass multiple protocol communication challenges with one device and save yourself a lot of time. Now you can integrate even if you have more then one HVAC brand installed. Just use CoolMasterNet and connect the compatible brands to one control panel.

CoolPlug Daikin

CoolPlug Daikin

CoolPlug and CooLinkHub are CoolAutomation gateway solution to help you remotely access and control Multi-split and split air conditioning systems. The solution enables simple integration with Home Automation and Smart Home devices.The gateway supports HVAC professionals striving to deliver a great customer experience and Home Automation integrators needing to save time on complex HVAC integration.

CoolPlug is brand specific and currently supports the following brands:

Daikin KRP(P1P2)
Mitsubishi Electric
Hitachi
LG
Panasonic/Sanyo (for ducted systems)
Daikin Siesta
Mitsubishi Heavy Industries
Fujitsu
Toshiba (for ducted only)

CoolPlug Fujitsu

CoolPlug Fujitsu

CoolPlug and CooLinkHub are CoolAutomation gateway solution to help you remotely access and control Multi-split and split air conditioning systems. The solution enables simple integration with Home Automation and Smart Home devices.The gateway supports HVAC professionals striving to deliver a great customer experience and Home Automation integrators needing to save time on complex HVAC integration.

CoolPlug is brand specific and currently supports the following brands:

Daikin KRP(P1P2) 
Mitsubishi Electric
Hitachi
LG
Panasonic/Sanyo (for ducted systems)
Daikin Siesta
Mitsubishi Heavy Industries
Fujitsu 
Toshiba (for ducted only)

CoolPlug LG

CoolPlug LG

CoolPlug and CooLinkHub are CoolAutomation gateway solution to help you remotely access and control Multi-split and split air conditioning systems. The solution enables simple integration with Home Automation and Smart Home devices.The gateway supports HVAC professionals striving to deliver a great customer experience and Home Automation integrators needing to save time on complex HVAC integration.

CoolPlug is brand specific and currently supports the following brands:

Daikin KRP(P1P2) 
Mitsubishi Electric
Hitachi
LG 
Panasonic/Sanyo (for ducted systems)
Daikin Siesta
Mitsubishi Heavy Industries
Fujitsu
Toshiba (for ducted only)

CoolPlug Mitsubishi

CoolPlug Mitsubishi

CoolPlug and CooLinkHub are CoolAutomation gateway solution to help you remotely access and control Multi-split and split air conditioning systems. The solution enables simple integration with Home Automation and Smart Home devices.The gateway supports HVAC professionals striving to deliver a great customer experience and Home Automation integrators needing to save time on complex HVAC integration.

CoolPlug is brand specific and currently supports the following brands:

Daikin KRP(P1P2) 
Mitsubishi Electric
Hitachi
LG 
Panasonic/Sanyo (for ducted systems)
Daikin Siesta
Mitsubishi Heavy Industries
Fujitsu
Toshiba (for ducted only)

DHS Active Infrared Sensor

DHS Active Infrared Sensor

The Active Infrared Sensor is part of sensors family that creates an invisible infrared beam between the two units which can be placed up to 20 metres apart. The triger activates when someone or something moves through and breaks the beam.This sensor can be connected with any binary Z-Wave sensors to be a part of Z-Wave ecosystem. 

DHS Garage Press Limit Switch

DHS Garage Press Limit Switch

The DHS Garage Press Limit Switch is an industrial quality mechanical switch activated by the motion of garage doors, gates, windows etc.The DHS Garage Press Limit Switch can be connected with any binary Z-Wave sensors such as the FIBARO Z-Wave Universal Sensor and FIBARO Z-Wave Door/Window Sensor to report the status of your garage door to your Z-Wave gateway.

DHS Garage Roller Limit Switch

DHS Garage Roller Limit Switch

The DHS Garage Roller Limit Switch can be connected with any binary Z-Wave sensors such as the FIBARO Z-Wave Universal Sensor and FIBARO Z-Wave Door/Window Sensor to report the status of your garage door to your Z-Wave gateway.

Note: A Z-Wave sensor is not included with this device.

DHS RFID Wall Security Keypad

DHS RFID Wall Security Keypad

Control your Z-Wave Gateway with the wall-mount Mini Keypad RFiD. The keypad's "Home" and "Away" buttons allow you to quickly arm/disarm your security system and/or run automation scenarios. Four numbered buttons also provide scene controls. In addition to using pushbutton controls, you can wave the included keychain RFiD Key Tag in front of the keypad to arm/disarm the system. 

DHS RGBW LED Strip

DHS RGBW LED Strip

Unleash your fantasy decorating a living-room or bathroom. Create illumination effect to match weather conditions, your mood or a special occasion. 3 million colours on hand, waiting for your ideas!

This flexible strip light is perfect for any kind of illumination. Silicon gel type waterproof. Can be used for home ceiling, bathroom and kitchen lights, furniture, shelves and cupboards etc.

DHS Z-Wave Switch PlugIn

DHS Z-Wave Switch PlugIn

 The DHS Z-Wave Plug-In Switch is a smart switch with power measuring function which can be plugged into an Australian certified wall socket and used to turn home appliances ON and OFF.

  • Easy to use and DIY install
  • Completely wireless
  • Control ON/OFF function remotely by Z-Wave™ certified controllers / apps
  • Can be operated manually by the button on the device
  • Measure and report the power that is consumed through the socket (connected load)
  • Australian SAA certification
  • Configuration via Z-Wave parameters: Auto switch-off, Power reporting precision, Last knows status, and more

DOME Wireless Water Valve

DOME Wireless Water Valve

The Dome Home Automation Water Shut-Off Valve allows you to remotely turn ON/OFF a water valve using Z-Wave wireless protocol (921.42 MHz in Australia) and Z-Wave Hub App. It’s easily installed over existing valves without needing a plumber. It also ensures that you never have to deal with burst pipes or leaks that not only spoil your day but damage your home.

  • Works on quarter-turn ball valves up to 1-1/2"
  • Long power cord
  • Installs on top of your existing water valve (no plumber necessary)
  • Built-in Z-Wave Range Extender
  • Single tool installation

DOME Z-Wave D/W Sensor

DOME Z-Wave D/W Sensor

The Dome Z-Wave D/W Sensor can automate the lights to your doors and windows, and turn them off when you leave the room. Sleek, modern design, and battery operation, means you can install the long-range Dome Z-Wave D/W Sensor anywhere. Use with almost any Z-Wave Hub including: Wink, Home Seer, SmartThings, Vera, Harmony and more. 

DOME Z-Wave Mouse Zapper

DOME Z-Wave Mouse Zapper

The DOME Z-Wave Mouse Zapper is the smart, mess-free way of removing mice from your home or business. Dome Zapper takes care of critters in your kitchen and dining area. Dome knows this is no pleasant task, and now there’s a better way to do it that won’t leave you cleaning up blood or unsticking mice from a glue strip.

  • Battery powered 
  • Quick and mess free
  • Notification when a rodent is caught
  • Three second delay before zap keeps pets and children safe
  • Z-Wave Plus certified

DOME Z-Wave Multi-Sensor

DOME Z-Wave Multi-Sensor

The DOME Z-Wave Multi-Sensor is a versatile, battery powered sensor designed for security and lighting automation applications. Dome Z-Wave Motion Detector / Light sensor now officially Works with Vera Edge/Plus and Wink!. With the Dome Home Automation Motion Detector you can program your Z-Wave hub to light the way when you enter a room, dim lights to their perfect brightness, set it up to monitor your windows and doors, illuminate a hallway, or measure light levels so you're not wasting resources.  Use with most any Z-Wave Hub including: VeraEdge/Plus, Fibaro HC2, Wink, Home Seer, SmartThings,Harmony and more (subject to local RF availability).

  • Built-in ambient light sensor
  • Large 110° detection area

DOME Z-Wave Siren

DOME Z-Wave Siren

The DOME Z-Wave Siren is a versatile Z-Wave siren designed to alert you to more than just intruders. Release the power of your Z-Wave home security system with a siren that firmly reminds you something’s amiss or blares when trouble’s coming. The Dome Home Automation Wireless Z-Wave Battery Powered Home Security Siren works with your other security hub’s components to alert you when a door is ajar, there’s someone on your property or you have a home invasion. The Dome Home Automation Battery-Powered Siren updates you with your choice of three volume levels and you can choose specific chimes for various notifications. Use with most any Z-Wave Hub including: Vera, Fibaro HC2, Wink, Home Seer, SmartThings, Harmony and more.

DOME Z-Wave Water Sensor

DOME Z-Wave Water Sensor

The DOME Z-Wave Water Sensor is a compact, battery powered water leak sensor. Dome Leak Sensor now officially works with Vera and Wink Z-Wave Gateways! Use this battery-powered, smart-home leak detector anywhere you need to monitor water lines for potential problems. Toilets, refrigerators, water heaters, and other appliances and fixtures that require water lines can generate costly bills from ongoing small leaks and unexpected major breaks. The Dome Home Automation Water Resistant Leak Sensor keeps you up to date on the health of water lines leading in and out of these systems, and it sends you customized alerts via your connected Z-Wave Hub. Use with most any Z-Wave Hub including: Vera, Wink, Fibaro HC2, Home Seer, SmartThings, Harmony and more (subject to local RF availability) .

FAKRO Rain Sensor

FAKRO Rain Sensor

Installed in conjunction with the FAKRO ZWMP Weather Module, the FAKRO ZRD Rain Sensor can automatically close any window installation upon detecting rainfall.

  • Installed in conjunction with the FAKRO ZWMP Weather Module
  • Automatically closes windows upon detecting rainfall
  • Fitted heating elements to prevent interference from fog, mist and other weather conditions
  • Suitable for installation in an unsheltered area

FAKRO Wind Sensor

FAKRO Wind Sensor

When installed in conjunction with the FAKRO ZWMP Weather Module, the FAKRO ZWD Wind Sensor is a convenient device that’s designed to detect extreme wind changes. When mounted on a rooftop area, it can record wind speeds and notify any Z-Wave compatible windows to close upon reaching high speeds.

  • Easy-to-install in conjunction with the FAKRO ZWMP Weather Module
  • Closes Z-Wave compatible windows upon detecting a certain wind speed threshold (40kmph)

FAKRO Z-Wave Remote

FAKRO Z-Wave Remote

The FAKRO Z-Wave™ ZWP10 Remote  is a multi-purpose remote that’s capable of operating up to 10 different FAKRO and Z-Wave™ devices. For the simplest solution to managing your range of Z-Wave™ and FAKRO devices, the ZWP10 has everything you need.

  • Integrates easily and operate FAKRO window openers as well as other Z-Wave™ devices
  • Setting Mode (Inclusion/Exclusion/Association/Learning/Shift)

FAKRO Z-Wave W/Chain Winder15V

FAKRO Z-Wave W/Chain Winder15V

The FAKRO Z-Wave W/Chain Winder 12V is highly recommended for rooms with hard to reach windows. An automated system that controls ventilation openings can contribute significantly to maintaining a healthy and comfortable indoor climate.

  • Program in conjunction with the FAKRO ZWMP Weather Module, for automated window closing upon detecting rain and windfall
  • Remote control functionality for ease of use
  • Easily programmable to communicate with compatible Z-Wave gateways

FAKRO Z-Wave Wall Controller

FAKRO Z-Wave Wall Controller

The FAKRO Z-Wave™ ZWK10 Wall Controller  is a wall mounted multi-purpose remote that’s capable of operating up to 10 different FAKRO and Z-Wave™ devices. For the simplest solution to managing your range of Z-Wave™ and FAKRO devices, the FAKRO Z-Wave ZWK10 Wall Controller has everything you need.

  • Integrates easily and operate FAKRO window openers as well as other Z-Wave™ devices
  • Setting Mode (Inclusion/Exclusion/Association/Learning/Shift)

FAKRO Z-Wave Weather Module

FAKRO Z-Wave Weather Module

The FAKRO Z-Wave™ ZWMP Weather Module is the primary component for monitoring outside weather conditions, along with offering compatibility with a variety of Z-Wave™ home automation gateways. When installed in conjunction with the FAKRO ZRD Rain Sensor and FAKRO ZWD Wind Sensor, they can automatically close windows upon detecting wind or rainfall. 

  • Compatible with the FAKRO ZRD Rain Sensor, FAKRO ZWD Wind Sensor, Thermostat and other external devices
  • Automatically sends closure requests to electronic shutters, windows and skylights upon detecting rain or wind

FIBARO D/W Sensor (Brown2)

FIBARO D/W Sensor (Brown2)

The FIBARO Z-Wave D/W Sensor is a small, battery powered magnetic door and window sensor.

  • Easy to use and install
  • Completely wireless
  • Automatic software updates
  • Comes in multiple (seven) colours
  • Tamper and low battery alarm notification

FIBARO D/W Sensor 2 (Beige)

FIBARO D/W Sensor 2 (Beige)

The FIBARO Z-Wave D/W Sensor 2 is a small, battery powered magnetic door and window sensor with a built in temperature sensor.

  • Completely wireless
  • Automatic software updates
  • Includes a built in temperature sensor
  • Comes in multiple colours
  • Tamper and low battery alarm notification

FIBARO D/W Sensor 2 (Black)

FIBARO D/W Sensor 2 (Black)

The FIBARO Z-Wave D/W Sensor 2 is a small, battery powered magnetic door and window sensor with a built in temperature sensor.

  • Completely wireless
  • Automatic software updates
  • Includes a built in temperature sensor
  • Comes in multiple colours
  • Tamper and low battery alarm notification

FIBARO D/W Sensor 2 (Brown1)

FIBARO D/W Sensor 2 (Brown1)

The FIBARO Z-Wave D/W Sensor 2 is a small, battery powered magnetic door and window sensor with a built in temperature sensor.

  • Completely wireless
  • Automatic software updates
  • Includes a built in temperature sensor
  • Comes in multiple colours
  • Tamper and low battery alarm notification

FIBARO D/W Sensor 2 (Brown2)

FIBARO D/W Sensor 2 (Brown2)

The FIBARO Z-Wave D/W Sensor 2 is a small, battery powered magnetic door and window sensor with a built in temperature sensor.

  • Completely wireless
  • Automatic software updates
  • Includes a built in temperature sensor
  • Comes in multiple colours
  • Tamper and low battery alarm notification

FIBARO D/W Sensor 2 (Brown3)

FIBARO D/W Sensor 2 (Brown3)

The FIBARO Z-Wave D/W Sensor 2 is a small, battery powered magnetic door and window sensor with a built in temperature sensor.

  • Completely wireless
  • Automatic software updates
  • Includes a built in temperature sensor
  • Comes in multiple colours
  • Tamper and low battery alarm notification

FIBARO D/W Sensor 2 (Grey)

FIBARO D/W Sensor 2 (Grey)

The FIBARO Z-Wave D/W Sensor 2 is a small, battery powered magnetic door and window sensor with a built in temperature sensor.

  • Completely wireless
  • Automatic software updates
  • Includes a built in temperature sensor
  • Comes in multiple colours
  • Tamper and low battery alarm notification

FIBARO D/W Sensor 2 (White)

FIBARO D/W Sensor 2 (White)

The FIBARO Z-Wave D/W Sensor 2 is a small, battery powered magnetic door and window sensor with a built in temperature sensor.

  • Completely wireless
  • Automatic software updates
  • Includes a built in temperature sensor
  • Comes in multiple colours
  • Tamper and low battery alarm notification

FIBARO Dimmer Bypass 2

FIBARO Dimmer Bypass 2

The Fibaro Dimmer Bypass 2 (FGB-002) is a supplementary device to the Fibaro Z-Wave Dimmer 2 (FGD212 only) allowing it to control lamps which use at least 5W.

  • Easy to use and install
  • Supports low power lamps such as LEDs or energy saving compact fluorescent lamps

FIBARO Home Center 2 System (black)

FIBARO Home Center 2 System (black)

The FIBARO Home Center 2 Z-Wave gateway is a wireless home controller which allows you to build and manage your own Z-Wave network.

  • Extremely efficient hardware infrastructure
  • Remote access via web or mobile phone
  • Low energy consumption
  • Geo localization - allows you to track your family members
  • SMS notifcation
  • Advanced recovery system
  • Maintains a history of events

FIBARO Home Center Lite System

FIBARO Home Center Lite System

We have the honor to present you the new dimension of comfort – Home Center Lite, incredibly compact brain of the FIBARO System. Latest creation, designed with your needs in mind. Let it change your life, making it safer and more convenient, and your home intelligent, efficient and comfortable. Little thing – great effect!

FIBARO Z-Wave Button (Black)

FIBARO Z-Wave Button (Black)

The FIBARO Button is a compact, battery powered Z-Wave Plus device that allows you to control devices and run scenes in your Z-Wave network.

  • Completely wireless
  • Z-Wave Plus certified
  • Supports 6 different actions/scenes
  • Available in multiple colours (white, black, red, blue, yellow)

FIBARO Z-Wave Button (Blue)

FIBARO Z-Wave Button (Blue)

The FIBARO Button is a compact, battery powered Z-Wave Plus device that allows you to control devices and run scenes in your Z-Wave network.

  • Completely wireless
  • Z-Wave Plus certified
  • Supports 6 different actions/scenes
  • Available in multiple colours (white, black, red, blue, yellow)

FIBARO Z-Wave Button (Red)

FIBARO Z-Wave Button (Red)

The FIBARO Button is a compact, battery powered Z-Wave Plus device that allows you to control devices and run scenes in your Z-Wave network.

  • Completely wireless
  • Z-Wave Plus certified
  • Supports 6 different actions/scenes
  • Available in multiple colours (white, black, red, blue, yellow)

FIBARO Z-Wave Button (White)

FIBARO Z-Wave Button (White)

The FIBARO Button is a compact, battery powered Z-Wave Plus device that allows you to control devices and run scenes in your Z-Wave network.

  • Completely wireless
  • Z-Wave Plus certified
  • Supports 6 different actions/scenes
  • Available in multiple colours (white, black, red, blue, yellow)

FIBARO Z-Wave Button (Yellow)

FIBARO Z-Wave Button (Yellow)

The FIBARO Button is a compact, battery powered Z-Wave Plus device that allows you to control devices and run scenes in your Z-Wave network.

  • Completely wireless
  • Z-Wave Plus certified
  • Supports 6 different actions/scenes
  • Available in multiple colours (white, black, red, blue, yellow)

FIBARO Z-Wave Dimmer 2

FIBARO Z-Wave Dimmer 2

 The Fibaro Z-Wave In-Wall Dimmer 2 (FGD-212) is a newest version of a popular wireless controller designed to operate behind a wall switch.

  • Control the level of illumination of your light remotely or using a manual button (in two and three way configuration)
  • Implemented algorithm of smart light source detection
  • Acts as a repeater expanding your Z-Wave network
  • Wide range of compatibility with existing light fittings and does NOT require expensive re-wiring

FIBARO Z-Wave Flood Sensor

FIBARO Z-Wave Flood Sensor

Fibaro Flood Sensor is a universal, Z-Wave compatible, flood and temperature sensor. Device can be battery (ca. 2 years battery life) or VDC powered (12 or 24 VDC). Flood alarm is sent to the Z-Wave network devices or additionally to any alarm system controller, through opening a NC contact. The device has built in LED indicator and acoustic alarm. LED diode signals flood, operating mode or the Z-Wave  network communication range. Fibaro Flood Sensor is sink-proof, which means it drifts on the water surface and keeps on sending alarm signal in case of  substantial inundation of water.

FIBARO Z-Wave KeyFob

FIBARO Z-Wave KeyFob

The FIBARO Keyfob is a battery powered, compact remote controller that allows you to control devices in your Z-Wave network.

  • Supports 30 different actions
  • Z-Wave Plus certified
  • Fully configurable, automatic pin lock prevents unauthorised use
  • Supports protected mode (Z-Wave network security mode) with AES-128 encryption

FIBARO Z-Wave Multi Sensor

FIBARO Z-Wave Multi Sensor

The Fibaro Motion Sensor is a universal Z-Wave multi-sensor. Along with detecting motion the device measures the temperature and light intensity. The sensor has a built-in accelerometer to detect anytampering of the device. The Fibaro Motion Sensor is battery powered device and designed to be installed quckly and easily on any surface. The LED indicator signals motion, temperature level, operating mode and can be used to see if device is within the Z-Wave network. The motion sensor can be used for lighting scenes and security monitoring systems

FIBARO Z-Wave R/Shutter 3

FIBARO Z-Wave R/Shutter 3

 The Fibaro Roller Shutter Controller is designed to control blind, awning, garage door and gate motors.

  • Supports five different types of motor systems
  • Precise positioning of blind or awning
  • Automatic calibration
  • Wireless control of AC motors with "three wires" interface
  • Monitor and analyse energy usage

FIBARO Roller Shutter 3 (FGR-223) is the new Z-Wave Plus version of its predecessor model Fibaro Roller Shutter 2.  

FIBARO Z-Wave RGBW Controller

FIBARO Z-Wave RGBW Controller

The FIBARO Z-Wave RGBW Controller is a wireless controller which enables you to manage your lighting decoration.

  • Wirelessly control LEDs with an unlimited range of colour options
  • Monitors energy usage
  • Four analogue sensor inputs
  • Four dimmer channels
  • Acts as a repeater expanding your Z-Wave network

FIBARO Z-Wave Swipe Pad White

FIBARO Z-Wave Swipe Pad White

Swipe is a wireless, battery-powered, gesturecontrolled pad that allows you to activate Z-Wave scenes or commands with a simple wave of the hand. A single gesture or a combination of gestures may be used – for example, swipe “down” to turn off the lights, “up” to open your blinds

  • Endless control possibilities – e.g. wave goodbye to activate your “going out” scene, swipe up to raise the volume on your sound system, swipe down to close difficult to reach skylight windows, reach out your hand from bed in the morning to activate your coffee machine

FIBARO Z-Wave Universal Sensor

FIBARO Z-Wave Universal Sensor

The Fibaro Z-Wave Universal Sensor is a wireless module that allows sensors with a binary output to communicate with the wireless Z-Wave network.

  • Supports four DS18B20 temperature sensors
  • Compatible with regular and parametric alarm lines (up to 2 alarm detectors)
  • Inputs: 2 potential-free inputs, 1 digital 1-wire input
  • Outputs: 2 potential-free outputs

FIBARO ZWave Dbl Switch 2

FIBARO ZWave Dbl Switch 2

The new Fibaro Z-Wave Double Switch 2 (FIBEFGS-223) is a smart Z-Wave wireless module which can control two circuits each with a maximum load of 6.5A per channel and 10A total load per circuit. 

  • Control the ON-OFF function of two two independent circuits or appliances remotely or using a wall switch
  • Compatible with all Z-Wave networks
  • Acts as a repeater expanding your Z-Wave network
  • Wide range of compatibility with existing light fittings and does NOT require expensive cabling
  • Latest generation Z-Wave 500 series chip
  • Very accurate energy measurement +/- 1 % for power above 5W
  • Supports secure mode (Z-Wave Network Security) encrypted with AES-128
  • No dry contacts - this is important.

FIBARO ZWave Dbl Switch InWall

FIBARO ZWave Dbl Switch InWall

 The Fibaro Z-Wave Double Switch Controller (FGS-222) is a wireless controller which can control two circuits each with a maximum load of 1.5kW per circuit. 

  • Control the ON-OFF function of two two independent lights or appliances remotely or using a wall switch
  • Compatible with all Z-Wave networks
  • Acts as a repeater expanding your Z-Wave network
  • Wide range of compatibility with existing light fittings and does NOT require expensive cabling

FIBARO ZWave Sgl Switch 2

FIBARO ZWave Sgl Switch 2

 The Fibaro Z-Wave Single Switch 2 is a wireless Z-Wave module which can control appliances or lighting up to a maximum load of 2.0kW. 

  • Control the ON-OFF function of a circuit remotely or using a wall switch
  • Compatible with all Z-Wave networks
  • Acts as a repeater expanding your Z-Wave network
  • Wide range of compatibility with existing light fittings and does NOT require expensive cabling
  • control loads up to 2kW (8A)

FIBARO ZWave Sgl Switch InWall

FIBARO ZWave Sgl Switch InWall

 The Fibaro Z-Wave Single Switch Controller is a wireless controller which can control appliances or lighting up to a maximum load of 2.5kW 10A. 

  • Control the ON-OFF function of a circuit remotely or using a wall switch
  • Compatible with all Z-Wave networks
  • Acts as a repeater expanding your Z-Wave network
  • Wide range of compatibility with existing light fittings and does NOT require expensive cabling

HIKVISION 4.0MP Bullet Camera

HIKVISION 4.0MP Bullet Camera

The HIKVISION 4.0MP Bullet Camera is an affordable and durable, high resolution camera.

  • 4MP resolution 2560x1440 @ 20fps
  • 2.8mm fixed focal lens, 100˚ horizontal field of view
  • Dual Stream, H.265/H.264
  • IR up to 30m
  • Digital WDR (Wide Dynamic Range)
  • 3D DNR (Digital Noise Reduction)
  • Powered by 12V DC or PoE
  • Motion detection
  • IP67 weather resistant

HIKVISION 4.0MP Dome Camera

HIKVISION 4.0MP Dome Camera

The HIKVISION 4.0MP Dome Camera is an affordable and durable, high resolution camera.

  • 4MP resolution 2560x1440, 20fps
  • 2.8mm fixed focal lens
  • Dual Stream, H.265/H.264
  • IR up to 30m
  • Digital WDR (Wide Dynamic Range)
  • 3D DNR (Digital Noise Reduction)
  • Powered by 12V DC or PoE
  • Motion detection
  • IP67 weather resistant, IK10 vandal resistant

HikVision NVR 8ch

HikVision NVR 8ch

The DS-7608NI-I2-8P is an 8 channel embedded plug and play network video recorder from Hikvision. Part of Hikvision's I Series NVR range, it houses a 4-core processor from Huawei and supports H.264+ intelligent compression which aims to reduce bandwidth and storage requirements by up to 50%. Additionally, this NVR combines multiple advanced technologies such as audio and video decoding technology, network technology and intelligent technology, all contributing factors to the I Series range running smoother than previous generations. Featuring 8 PoE network interfaces for easy plug and play setup and capable of 4K(UHD) video output via HDMI and 1080P via VGA, this NVR supports up to 12MP resolution recording.

INTESIS Daikin SKY/VRV Adapter

INTESIS Daikin SKY/VRV Adapter

There are no many options to integrate high end ducted cooling/heating system from Daikin with latest Z-Wave Home Automation Gateways. You'll have only one option to have wired thermostat on the wall and not even IR hand held remote.
However well known in HVAC industry Spanish manufacturer INTESIS providing elegant solution to make it work.

Intesis Daikin SKY/VRV Adapter solution will help you remotely access and control DaikinSKY/VRV ducted conditioning systems. The solution enables simple integration with Vera/Ezlo branded Z-Wave Gateways.The gateway supports HVAC professionals striving to deliver a great customer experience and Home Automation integrators needing to save time on complex HVAC integration.

INTESIS Mitsubishi AC Adapter

INTESIS Mitsubishi AC Adapter

There are no many options to integrate high Domestic (RAC), Mr Slim and City Multi line cooling/heating system from Mitsubishi Electric with latest Z-Wave Home Automation Gateways. 
However well known in HVAC industry Spanish manufacturer INTESIS providing elegant solution to make it work and have two way communication with cooling/heating systems and Smart Home Gateway.

INTESIS Mitsubishi  Adapter solution will help you remotely access and control Mitsubishi Electric Domestic (RAC), Mr Slim and City Multi line air conditioning systems. The solution enables simple two way integration with Vera/Ezlo branded Z-Wave Gateways.The gateway supports HVAC professionals striving to deliver a great customer experience and Home Automation integrators needing to save time on complex HVAC integration.

INTESIS MitsubishiHVRF Adapter

INTESIS MitsubishiHVRF Adapter

There are no many options to integrate high end ducted cooling/heating system from Mitsubishi Heavy Industries with latest Z-Wave Home Automation Gateways. You'll have only one option to have wired thermostat on the wall and not even IR hand held remote.
However well known in HVAC industry Spanish manufacturer INTESIS providing elegant solution to make it work.

Intesis Mitsubishi Heavy Industries VRF Adapter solution will help you remotely access and control Mitsubishi Heavy Industries VRF ducted conditioning systems. The solution enables simple integration with Vera/Ezlo branded Z-Wave Gateways.The gateway supports HVAC professionals striving to deliver a great customer experience and Home Automation integrators needing to save time on complex HVAC integration.

INTESIS Panasonic ECO Adapter

INTESIS Panasonic ECO Adapter

If you have Panasonic ECOi and PACi ducted air conditioning system and want to integrate it with Home Automation controller look no further. INTESIS Panasonic ECO/PAC Adapter makes the Panasonic air conditioning system talk to Home Automation Gateway via TCP/IP protocol using your Wi-Fi network.


The solution enables simple integration with Vera/Ezlo branded Z-Wave Gateways.The gateway supports HVAC professionals striving to deliver a great customer experience and Home Automation integrators needing to save time on complex HVAC integration.

INTESIS Toshiba VRF Adapter

INTESIS Toshiba VRF Adapter

There are no many options to integrate high end ducted cooling/heating system from Toshiba with latest Z-Wave Home Automation Gateways. You'll have only one option to have wired thermostat on the wall and not even IR hand held remote.
However well known in HVAC industry Spanish manufacturer INTESIS providing elegant solution to make it work.

Intesis Toshiba VRF Adapter solution will help you remotely access and control Toshiba VRF ducted conditioning systems. The solution enables simple integration with Vera/Ezlo branded Z-Wave Gateways.The gateway supports HVAC professionals striving to deliver a great customer experience and Home Automation integrators needing to save time on complex HVAC integration.

PHILIO Z-Wave Humidity Sensor

PHILIO Z-Wave Humidity Sensor

The PHILIO Z-Wave Humidity Sensor is a battery powered, temperature and humidity sensor ideal for use in bathrooms or basements alongside a Z-Wave controlled exhaust fan to maintain a suitable level of humidity and prevent excessive dampness and mould formation.

  • Z-Wave Plus certified
  • Configurable temperature and humidity report triggers
  • Long battery life and low power reporting
  • Supports Over the Air (OTA) firmware updates

PHILIO Z-Wave Multi-Sensor

PHILIO Z-Wave Multi-Sensor

The PHILIO Z-Wave Multi-Sensor is a battery powered, PIR, temperature and light  level sensor, all in one small package.

  • Z-Wave Plus certified
  • Configurable temperature and light level report triggers
  • Long battery life and low power reporting
  • Supports Over the Air (OTA) firmware updates

PHILIO Z-Wave PIR Recessed

PHILIO Z-Wave PIR Recessed

The PHILIO Z-Wave PIR Recessed is a small, battery powered motion sensor designed to be installed within a wall or ceiling.

  • 2 year battery life
  • Detects movement up to 10m
  • Z-Wave Plus certified
  • IP43 protection class - suitable for light outdoor use

PHILIO Z-Wave PIR Sensor

PHILIO Z-Wave PIR Sensor

The PHILIO Z-Wave PIR Sensor is a small, battery powered motion sensor with a 360° adjustable viewing direction.

  • 2 year battery life
  • Detects movement up to 10m
  • Z-Wave Plus certified
  • Includes a lens cover to limit viewing angle
  • IP43 protection class - suitable for light outdoor use

PHILIO Z-Wave Smoke Sensor

PHILIO Z-Wave Smoke Sensor

This sensor comes with everything you need to install it into an existing Z-Wave network, including mounting screws, drywall anchors, and a CR123A battery.

  • Extremely easy installation - simply install it in location prone to fire.
  • Powered with one CR123A battery (included).
  • Alarm is signaled by loud 85db sound and LED diode.
  • Support the security, OTA.
  • NWI automated inclusion functionality.

QUBINO Z-Wave 1 Relay

QUBINO Z-Wave 1 Relay

The QUBINO Z-Wave 1 Relay, manufactured by GOAP in Europe, is a Z-Wave module for switching on or off the electrical device (e.g. light, fan, etc ...). The module can be controlled either through Z-wave network or through the wall switch manually.

This module is designed to be mounted  behind a traditional wall switch. Module measures power consumption of load and supports connection of digital temperature sensor. It is designed to act as repeater in order to improve range and stability of Z-Wave network.

QUBINO Z-Wave 1D Relay

QUBINO Z-Wave 1D Relay

The QUBINO Z-Wave 1D Relay, manufactured by GOAP in Europe, is a single channel wireless Z-Wave relay with voltage-free (dry) contacts capable of controlling lights and appliances up to 10A. It connects wirelessly with your Z-Wave controller and fits easily into an existing light switch, enabling you to wirelessly control appliances. The smart switching module also works as a repeater to improve range and stability of your Z-wave network. The module can be controlled either through Z-wave network or through the wall switch manually.

QUBINO Z-Wave 2 Relays

QUBINO Z-Wave 2 Relays

The QUBINO Z-Wave 2 Relays, manufactured by GOAP in Europe, is a Z-Wave module for switching on or off one or two electrical devices (e.g. light, fan, etc ...). The module can be controlled either through Z-wave network or through the wall switch manually.

This module is designed to be mounted  behind a traditional wall switch. Module measures power consumption of load and supports connection of digital temperature sensor. It is designed to act as repeater in order to improve range and stability of Z-Wave network.

QUBINO Z-Wave Dimmer

QUBINO Z-Wave Dimmer

The QUBINO Z-Wave Dimmer, manufactured by GOAP in Europe, is the first MOSFET- switching light Z-Wave dimmer module that also supports control of low-voltage halogen lamps with electronic transformer, dimmable compact fluorescent lights and dimmable LED bulbs. It also measures the power consumption of electrical devices and supports the connection of a digital temperature sensor.

QUBINO Z-Wave Dimmer 0-10V

QUBINO Z-Wave Dimmer 0-10V

The absolute best selling QUBINO Z-Wave Dimmer 0-10V, manufactured by GOAP in Europe, is unique. This Z-Wave product which was developed to provide for the needs of Smart Home users looking for a Z-Wave solution that controls devices such as lights, fans and similar products with 0-10V signal. The QUBINO Flush Dimmer 0-10V is ideal for remotely dimming LED lights with low voltage ballast.

QUBINO Z-Wave ON/OFF Thermostat

QUBINO Z-Wave ON/OFF Thermostat

The QUBINO Z-Wave ON/OFF Thermostat, manufactured by GOAP in Europe, is ideal for directly controlling electric or water-based heating systems such as electric water heaters or hot water pumps.

  • Z-Wave Plus certified
  • Includes digital temperature sensor
  • Can measure the power consumption of connected device (within 3% accuracy)
  • Extremely low energy consumption (less than 0.4W)

QUBINO Z-Wave Shutter

QUBINO Z-Wave Shutter

The QUBINO Z-Wave Shutter, manufactured by GOAP in Europe, is the world's smallest Z-Wave module able to control the motors of blinds, rollers, shades and Venetian blinds.

  • Supports the connection of a temperature sensor
  • Requires 3-wire (including neutral) installation
  • Can measure the power consumption of connected device

QUBINO Z-Wave Shutter DC

QUBINO Z-Wave Shutter DC

The QUBINO Z-Wave Shutter DC, manufactured by GOAP in Europe, is the world's smallest Z-Wave module able to control 12-24V DC motors of blinds, rollers, shades and Venetian blinds. It is designed to fit into an existing switch and enables you to wirelessly control blind motors using a Z-Wave enabled controller. This device also supports precise positioning for motors equipped with mechanical or electronic switches.

  • Z-Wave Plus certified
  • Supports the connection of a temperature sensor
  • Can measure the power consumption of connected device

QUBINO Z-Wave Temperature Sensor

QUBINO Z-Wave Temperature Sensor

The QUBINO Z-Wave Temperature Sensor, manufactured by GOAP in Europe, is capable of measuring temperatures between -50°C ~ 125°C with 0.5°C accuracy.

  • 1m long cable
  • Connects directly to any GOAP module
  • Integrates with; VeraEdge, VeraPlus, Zipato, NETIC

Note: This product is currently not supported by Fibaro gateways.

REMOTEC Z-Wave A/C Controller

REMOTEC Z-Wave A/C Controller

ZXT-600 is a Z-Wave plus compliant Z-Wave-to-IR Bridge to control split air conditioner by receiving Z-Wave command and translating to Infrared command. With its comprehensive built-In and cloud-stored IR database (library). ZXT-600 can control different brands and models of air conditioners worldwide. ZXT-600 is a security enabled Z-Wave plus device. A security Enabled Z-Wave Plus Controller must be used in order to fully utilize the product.

  • Control your air-conditioner remotely using a Z-Wave Home Controller
  • Works with all types of AC IR interface
  • Built in temperature sensor informs you of current room temperature
  • USB powered, 5V DC Jack or 1 year battery life on 2 x AA batteries

REMOTEC Z-Wave Adv Remote

REMOTEC Z-Wave Adv Remote

 The DHS Z-Wave Advanced Remote (manufactured by Remotec) is capable of creating and controlling a Z-Wave network as well as acting as a secondary controller to an IP Gateway (like Vera 3/Lite).

  • Control devices individually or in groups using preset scenes(up to 12 scenes)
  • 1 year battery life
  • Compatible with most Z-Wave enabled devices
  • Supports multi-channel devices

REMOTEC Z-Wave Thermostat 500

REMOTEC Z-Wave Thermostat 500

The REMOTEC Z-Wave Thermostat ZTS-500 is a programmable electronic thermostat controller allowing you to keep your home at a comfortable temperature at all times. A smart thermostat designed with the end user in mind. It combines compatibility with any Z-Wave certified controller or gateway with an incredibly simple and intuitive user interface.

  • Support 2 stage heat, 2 stage cool, 2 stage fan 
  • 24Vac single & two stage conventional heating systems (gas/oil/electric) 
  • Heat pump systems with up to two stages of heating (electric/gas)
  • Zoned forced air and zoned hot water (2 or 3 wire)
  • Millivolt systems (12-24Vac or DC source)
  • One or two stage cooling systems
  • Hybrid systems
  • Z-Wave Dual mode (FLiRS, Always Listening)

REMOTEC ZRC-90 Scene Master

REMOTEC ZRC-90 Scene Master

REMOTEC ZRC-90 Scene Master is a Z-Wave enabled secondary controller for your Z-Wave network. When buttons on the ZRC-90 is pushed, your Z-Wave central controller will receive a signal which it can use to trigger unlimited control possibilities. With 8 buttons, each supporting a long-press capability, you can control 16 different actions in your central controller. With a convenient snap-in wall mount, the ZRC-90 can also be removed to keep it handy while you go about your home for the ultimate in simple convenience.

RF 433MHz to Z-Wave Bridge

RF 433MHz to Z-Wave Bridge

This unit gives you the ability to communicate with a largest number of sensors and controlled devices that operate within in the 433Mhz spectrum. It includes a hardware extension and additional firmware to enable it to support Somfy wireless blinds (RTS). The extended functionality is already supported in Domoticz, Homeseer and the VERA RFX plugin.

  • Supports a huge range of 433MHz devices and sensors
  • Enables easy access to LightwaveRF network set-up and device control
  • Extended version - features support for Somfy Wireless blinds

SECO-LARM Fingerprint Reader and Keypad

SECO-LARM Fingerprint Reader and Keypad

Fingerprint readers are unique and highly secure. They are used to lock/unlock the devices and apps, security systems and access control solutions without needing to remember the passwords, they are easier and faster to setup.

Fingerprint reader offers very high accuracy. It is the most economical biometric authentication technique and one of the most developed biometrics.

Benefits of the biometric finger print reader are obvious. It is quite easy to copy a key or write down an alarm code and pass it along to unauthorized persons. It is nearly impossible to duplicate another person’s fingerprint in a form that the scanner will recognize. The other types of access control solutions have a weakness in that they depend on something that can easily be lost, shared or duplicated. Finger print reader have none of those weaknesses , whomever has an approved finger print does not necessarily have access to any other part of the security system.

SK-2612-SFSQ can be easy integrated into Z-Wave ecosystem by attaching Z-Wave device with binary input. 

Universal Multisensor Recessor

Universal Multisensor Recessor

This handy Universal Multisensor Recessor can be used to recess a DOME, PHILIO or Fibaro multi-sensor.

Use the Universal Multisensor Recessor to place multi-sensors within a wall or ceiling allowing them to serve their function more discreetly and preserving the aesthetic appeal of your home. It is easy to install and remove. Simply twist the cover off the recessor and place your multi-sensor inside, then pull the recessor clips back as you insert it into the hole in your wall/ceiling.

You can also use the Universal Multisensor Recessor in narrow locations such as hallways to reduce the risk of it being knocked about by passers by.

VBell VideoVoIP Intercom Black

VBell VideoVoIP Intercom Black

The new, sleek and modern VBell™ Video VoIP Intercom allows you to see and communicate with visitors at your door even when you're not at home. This Smart Home intercom includes a high definition camera and two-way communication sound system, using Voice over IP (VoIP) video-audio transfer technology. It can be accessed through your smart phone or tablet from any location around the world, and provides a simple way to protect and secure your home.

  • Two-way SIP based communication sound system
  • 1280x720P High Definition camera
  • A (single) built in relay output (allows you to control an electrical door lock or alarm)
  • Keeps a log of missed calls and snapshot images
  • Supports PoE (Power over Ethernet)

VBell VideoVoIP Intercom White

VBell VideoVoIP Intercom White

The new, sleek and modern VBell™ Video VoIP Intercom allows you to see and communicate with visitors at your door even when you're not at home. This Smart Home intercom includes a high definition camera and two-way communication sound system, using Voice over IP (VoIP) video-audio transfer technology. It can be accessed through your smart phone or tablet from any location around the world, and provides a simple way to protect and secure your home.

  • Two-way SIP based communication sound system
  • 1280x720P High Definition camera
  • A (single) built in relay output (allows you to control an electrical door lock or alarm)
  • Keeps a log of missed calls and snapshot images
  • Supports PoE (Power over Ethernet)

VERA Edge Home Controller AU

VERA Edge Home Controller AU

The VERA Edge Home Controller is a reliable, affordable Z-Wave Gateway which allows you to create and control your very own Z-Wave smart home.

  • Control over 220 devices at a time from Vera Edge (can be extended to even more)
  • Supports all Z-Wave certified devices in AUS/NZ/BR frequency of 921.42MHz, including Z-Wave Plus!
  • WPS easy push button pairing for Wi-Fi devices
  • User-friendly app for Apple IOS and Google Android with 300+ plug-ins
  • Geo fencing feature lets your house or office know when you're coming or going

VERA Plus Home Controller AU

VERA Plus Home Controller AU

The VERA Plus Home Controller is the world's most compatible home automation controller!

THE SIMPLEST WAY TO CONTROL YOUR HOME. ANYTIME. ANYWHERE.

We put the convenience, freedom, and peace of mind that a smart home provides, right in the palm of your hand. You can view and manage your home using your smartphone, tablet, or computer from the comfort of your couch, or from halfway around the world!

Vera Secure home controller AU

Vera Secure home controller AU

VeraSecure is an easy-to-install comprehensive home controller/alarm hub. It’s like a security panel in a box. Just add sensors, cameras and locks – choosing from dozens of brands – and VeraSecure does the rest. Compatible with Amazon Alexa.

VISION Z-Wave CO Sensor

VISION Z-Wave CO Sensor

Protect yourself with this battery operated VISION Z-Wave CO Sensor. One button tests all alarm functions as well as mutes unwanted alarms. This carbon monoxide sensor utilizes an electrochemical sensor for increased accuracy. Has easy access to the battery and a durable/lightweight design for optimal portability. This sensor is fully compatible with any Z-Wave Plus enabled network and its security framework.  

  • Completely wireless
  • Loud 85db alarm
  • Long battery life
  • Electrochemical sensor, most accurate technology available for detecting carbon monoxide, compared to other common sensing technologies.

VISION Z-Wave D/W Sensor 4in1

VISION Z-Wave D/W Sensor 4in1

The Vision 4 in 1Z-Wave D/W Sensor is a small, battery powered, magnetic sensor capable of detecting when a door/window is opened as well as changes in humidity, light and temperature.  This sensor is a Z-Wave enabled device (interoperable, two-way RF mesh networking technology) and is fully compatible with any Z-Wave Plus enabled network and its security framework.  Vision 4 in 1Z-Wave D/W sensor  sends Z-Wave signal when door or window is opened or closed or there is a humidity, temperature, luminance change.

  • Completely wireless
  • Door/Window, humidity, temperature and illuminance sensor in one device
  • New Z-Wave 500 series chip supports over-the-air firmware updates
  • Low battery LED indicator
  • Easy installation

VISION Z-Wave KeyFob (4)

VISION Z-Wave KeyFob (4)

 The VISION Z-Wave Plus KeyFob (4) controller allows the user to wirelessly control home appliances using Z-Wave enabled devices.

  • Highly intuitive and easy to use user interface
  • Micro USB Charger (5V)
  • Lithium Rechargeable Battery (220mAH)
  • Setting Mode (Inclusion/Exclusion/Association/Learning/Shift)
  • Control Mode (Arm/Disarm, On/Off Control)
  • Z-Wave Plus certified device
  • Supports over-the-air Firmware updates

VISION Z-Wave Outdoor Siren

VISION Z-Wave Outdoor Siren

The VISION Z-Wave Siren and Strobe DC is a wireless device capable of producing an audible and visual alarm. This device is designed to operate alongside a Z-Wave enabled sensor which can detect a threat to your household.The Outdoor Z-Wave Siren also includes a battery status indicator which will notify you when its battery level is low and a tamper alarm which will alert the associated Z-Wave gateway if anyone attempts to tamper with this device.

  • Blue LED flashing strobe light
  • Loud (>115dB @ 1m) audible alarm
  • Low battery and tamper indicators
  • This device includes 4 DD batteries
  • Configurable with Z-Wave certified gateways

VISION Z-Wave Range Extender

VISION Z-Wave Range Extender

 The Vision Z-Wave Range Extender is a smart, discrete Z-Wave device designed to amplify the signals of any Z-Wave devices in your Z-Wave network which helps to eliminate "RF dead spots". The Vision Z-Wave Range extender is designed to amplify the signals of any Z-Wave device in your Z-Wave network. It is compatible with all Z-Wave enabled devices regardless of their manufacturers.

  • Amplifies signals to a range of up to 100m
  • Power level control
  • Wall mountable

VISION Z-Wave Recessed D/W Sensor

VISION Z-Wave Recessed D/W Sensor

The Vision Z-Wave Plus Recessed Door/Window Sensor is a small, wireless device that detects the opening and closing of your door/window. It has two pieces: a larger part (transmitter), and a smaller part (magnet), which will be inserted into your door and door frame, making the sensor almost invisible.

The Vision Z-Wave Plus Recessed Door/Window Sensor uses a replaceable lithium battery and should last 2 years under normal usage.

  • Concealed within a door/window frame
  • Low battery alarm notification
  • Firmware over the air upgrade functionality
  • Talks to Z-Wave certified devices in AUS/NZ/BR frequency of 921.42MHz
  • Z-Wave Plus certified

VISION Z-Wave Shock Sensor

VISION Z-Wave Shock Sensor

 The VISION Z-Wave Shock Sensor (ZS5101) is a smart, battery-powered sensor which detects any shocks and vibrations on the door or window which it is attached to.

  • Easy to use and install
  • Completely wireless
  • Adjustable sensitivity
  • Hidden tamper prevention trigger
  • Low battery alarm notification
  • Supports one Z-Wave group and up to 5 devices

VISION Z-Wave Siren and Strobe

VISION Z-Wave Siren and Strobe

The VISION Z-Wave Siren and Strobe is a wireless device capable of producing an audible and visual alarm. This device is designed to operate alongside a Z-Wave enabled sensor which can detect a threat to your household. The VISION Z-Wave Siren and Strobe also includes a battery status indicator which will notify you when its battery level is low and a tamper alarm which will alert the associated Z-Wave gateway if anyone attempts to tamper with this device.

  • Red LED flashing strobe light
  • Loud (105dB @ 1m) audible alarm
  • Low battery and tamper indicators
  • Configurable with Z-Wave certified gateways

VISION Z-Wave Siren DC Powered

VISION Z-Wave Siren DC Powered

The VISION Z-Wave Siren and Strobe DC is a wireless device capable of producing an audible and visual alarm.

  • Blue LED flashing strobe light
  • Loud (105dB @ 1m) audible alarm
  • Low battery and tamper indicators
  • Includes a 15V DC power supply
  • Configurable with Z-Wave certified gateways

VISION Z-Wave Tilt Sensor

VISION Z-Wave Tilt Sensor

The VISION Z-Wave Garage Door Tilt Sensor is a battery-powered device capable of detecting the horizontal or vertical position of your garage door allowing you to monitor its state from anywhere using your Z-Wave gateway.

  • Tilt sensor function
  • Supports an external switch/binary sensor
  • Long battery life with low power status indicator
  • Integrates with all certified Z-Wave controllers in Australian version (921.42MHz)

VISION Z-Wave USB Adapter

VISION Z-Wave USB Adapter

The VISION Z-Wave USB Adapter is a Z-Wave USB dongle. When attached to a PC, laptop etc, it becomes a Z-Wave communication device, which connect the PC/MAC based Z-Wave software(sold separately) with different Z-Wave devices through integrated USB. 

Within the Z-Wave wireless network the Z-Stick acts as a static controller with enhanced (SUC/SIS) network management function. In order to use the full functionality a software application such as Z-Cloud or Z-Way is needed to run on the host. Z-Stick supports all kinds of third party software complying with the Zensys Serial API.

VistaCam 1000 Outdoor IP Cam

VistaCam 1000 Outdoor IP Cam

With easy Wi-Fi setup, weatherproof case, infrared night illumination and HD picture quality, VistaCam 1000 is perfect for outdoor camera applications such as patios, driveways and garages where AC power is nearby. Features motion detection for automated recording. With one-touch Wi-Fi setup (WPS) VistaCam 1000 easily connects wirelessly to your Vera controller. View and hear anywhere on smartphone, tablet or browser, day or night. For viewing at night, the powerful built-in infrared (IR) illumination lets you see in the dark, up to fifteen feet from the camera.

VistaCam 700 Indoor IP Cam

VistaCam 700 Indoor IP Cam

The VistaCam 700 has everything you need for basic camera operation -- place it using the supplied swivel mount to show the view you want, and leave it.

The compact, elegant VistaCam 700 video camera features wired Ethernet and Wi-Fi operation (with WPS setup), High Definition image quality (HD 720p), built-in IR night illumination, motion detection, great value and easy setup with your Vera system!.

Yale Assure Digital Deadbolt (with key)

Yale Assure Digital Deadbolt (with key)

Controlled via the Yale Assure App, Yale’s “Twist and Go” function allows users the unique ability to unlock their door by twisting their smart phone when within Bluetooth range. The “Twist and Go” feature protects you and your family from unintended unlocking. Also offering a backlit touch screen keypad, users have the option of entering a PIN code to unlock the door.

  • Share up to 5 digital keys using the Yale App
  • Holds up to 12 unique PIN codes

Yale Assure Lock Keyless

Yale Assure Lock Keyless

The YALE Assure Keyless Digital Deadbolt makes keys a thing of the past using the new Z-Wave 500 series chip.

  • Open via keypad or using "Twist and Go" with your smartphone
  • Share up to 5 digital keys using the Yale App
  • Holds up to 12 unique PIN codes
  • Locks automatically after a short period

YALE Assure Z-Wave Module

YALE Assure Z-Wave Module

The YALE Assure Z-Wave Module (only) for YALE Assure Digital Deadbolts.

  • Share up to 5 digital keys using the Yale App
  • Holds up to 12 unique PIN codes
  • Locks automatically after a short period
  • Uses the new Z-Wave 500 series chip

Z-Wave Automation Bridge

Z-Wave Automation Bridge

Automationbridge helps bring different home automation and smart home systems together. Inspired by open-source solutions, our system builds on these solid foundations and integrates them together creating a simplified, powerful and cohesive system.

Add automationbridge to your Vera Edge, Vera Plus or Fibaro Home Center 2 Z-Wave Gateway Controller and instantly integrate your Z-Wave Scenes and Devices with Apple HomeKit, Amazon Alexa and Google Home.

Z-Wave Basics Book

Z-Wave Basics Book

Z-Wave Basics: Remote Control in Smart Homes Paperback – June 25, 2013 by Dr. Christian Paetz (Author)

Z-Wave™ is the leading international standard for wireless communication in Smart Homes. Different products from different vendors work together and interoperate in one single network to provide intelligent lighting, safety, security and energy efficiency.

This book describes all you need to know about Z-Wave™: The radio layer standardized by the international ITU organization, the networking between the device to realize a stable communication and finally the device specific application functions that ensure the interoperability between the different devices. Practical guidance for the installation and trouble shooting of wireless networks is provided as well.

Z-Wave Brochure A5

Z-Wave Brochure A5

Z-Wave™ Home Automation Brochure - printed version provided by © Digital Home Systems Pty Ltd

The Z-Wave™ Home Automation Brochure is an 8 page, A5 booklet designed to assist you to get more sales.

It is written in layman’s terms that customers can easily understand with subject headings: 

  • What is a Smart Home?
  • What is Z-Wave?
  • Control Anything
  • Comfort
  • Safety
  • Convenience
  • Holiday Home / Rentals
  • Savings
  • Ageing In Place, Disability & Home Care

There is a space left on the last page for your business contact details. You may use a sticker or stamp to let your customers know where to come for your services.

Z-Wave Cert Installer Toolkit

Z-Wave Cert Installer Toolkit

The Certified Installer Toolkit (CIT) is a tool for installers to test a Z-Wave network  prior to completion to ensure a robust, reliable mesh network is in place, and a powerful tool for troubleshooting and diagnosing problems. It may be left behind for logging or even permanent off-site maintenance. 

Developed by the Z-Wave Alliance with the latest capabilities & offerings; the Z-Wave Certified Installer Toolkit is a powerful, versatile tool for every installer:

  • Comprehensive network diagnostics & device management, accessible from anywhere in the world
  • Spectrum analyzer shows noise in the Z-Wave channels
  • Routing table displays which nodes are neighbors
  • Network map graphically displays how nodes are connected to each other
  • Z-Wave network sniffer (ZNiffer) will show what is actually sent by nodes and identify the type of message
  • Displays advanced node information such as device version, battery level, Z-Wave library version, and more
  • Access to Z-Wave device product information including manuals and technical data

Z-Wave Garage Door Opener

Z-Wave Garage Door Opener

The zConnect garage door opener pairs with your existing automatic garage door opener via wired garage motor wall opener momentary switch to provide wireless remote opening and closing control from your Z-Wave network and controller. When installed, you can open and close your garage door from anywhere. The zConnect garage door opener has a lot of build in extra functionality.

Z-Wave Keypad Lock MK2 (Left)

Z-Wave Keypad Lock MK2 (Left)

Z-Wave Keypad Lock MK2 (Left) offers the flexible versatility of a wireless and keyless locking solution with extra secure ANSI type mortese.  The lock is integrated with the popular Z-Wave network protocol which can be integrated into automation building solutions.  It features a Master pin code, low battery warning, emergency key override and many more safety features for your convenience.

Z-Wave Keypad Lock MK2 (Right)

Z-Wave Keypad Lock MK2 (Right)

Z-Wave Keypad Lock MK2 (Right) offers the flexible versatility of a wireless and keyless locking solution with extra secure ANSI type mortese.  The lock is integrated with the popular Z-Wave network protocol which can be integrated into automation building solutions.  It features a Master pin code, low battery warning, emergency key override and many more safety features for your convenience.

ZME Z-Wave RaZberry Card V2

ZME Z-Wave RaZberry Card V2

The Z-Wave.me Z-Wave RaZberry Card 2 is a tiny daughter card designed for the Raspberry PI which allows it to function as a Z-Wave gateway.

  • Plugs into the Raspberry PI GPIO interface 
  • Z-Wave Plus certified
  • Includes Z-Way AJAX-based demo user interface for easy access to Z-Wave functions
  • Includes all firmware drivers and Z-Wave stack
  • Optimized antenna provides greater range than earlier model

ZME Z-Wave USB Transceiver

ZME Z-Wave USB Transceiver

UZB1 - the world smallest Z-Wave Plus USB Stick.

UZB1 is a wireless Z-Wave transceiver which connects a PC, MAC or Linux computing platform to a wireless Z-Wave network via USB port. 

  • Compatible with Windows, Linux and Mac OS systems
  • Supports and powered by USB 2.0/3.0
  • Firmware upgrade functionality
  • Support all Z-Wave certified devices in AUS/NZ/BR frequency of 921.42MHz

ZME Z-Wave Z-Uno Board

ZME Z-Wave Z-Uno Board

The Z-WAVE.ME Z-Uno  is the first (and only) easy to use developer board that allows you to create your own Z-Wave device!

  • Compatible with many Arduino peripherals
  • Z-Wave Plus certified
  • Programmable with simplified C language
  • Supports 1-Wire and I2C (software)

DHS contact details

office@dhsys.com.au

All enquiries: 1300+ZWAVE (1300 099 283)
from overseas +61 (3) 94 32 8000

Main office and showroom:

Digital Home Systems Pty Ltd
3/143 Main Street,
Greensborough, VIC 3088, Australia
Reception: +61 3 94 32 8000

Contact Us

Search for installer

For over a decade Digital Home Systems has been providing quality Z-Wave products at competitive trade/wholesale prices for our installers and resellers. What’s more, our customers can enjoy additional benefits from working with us such as:

Become an installer/reseller with Digital Home Systems and you too can enjoy these exclusive benefits.

Powered by ChronoForms - ChronoEngine.com