Z-Wave solutions

Secure Your Home With Z-WaveIt's not always easy to find a Z-Wave device that can meet all of your home automation needs but there's finally a solution to your problems.The Z-Uno Development Board lets you build your ideal Z-Wave device! The power is now in your hands, simply build a device (using the Arduino platform) and connect it to the Z-Uno Development Board to enhance it with Z-Wave capabilities allowing you to include it into your Z-Wave network and use it just like any other Z-Wave device. You're only limited by your imagination!


The Z-Wave Solution for the Arduino Platform: Z-Uno

Z-Uno is the first, and only, easy to use developer board that allows you to create your own Z-Wave device without deep knowledge of Z-Wave protocol or programming. Z-Uno is a mix of Z-Wave home automation radio protocol power and Arduino simplicity. Inspired by Arduino, the Z-Uno project inherits its concepts of easy-to-use hardware and software solutions while keeping maximum flexibility.

Z-Uno is a fully DIY product. It is made for those who are limited by the existing choice of Z-Wave products and want to extend their smart home's capabilities with more sensors and actuators; connect LEDs, buttons, switches, motors or any low voltage sensor including most Arduino compatible sensors.

You can program the Z-Uno by writing a sketch in simplified C language and loading it onto Z-Uno using the Arduino IDE. The Z-Uno website has many examples and comprehensive tutorials which can help you kick start your own Z-Uno project.

Quick Overview

The Z-WAVE.ME Z-Uno is the first (and only) easy to use developer board that allows you to create your own Z-Wave device!

  • Compatible with many Arduino peripherals
  • Z-Wave Plus certified
  • Programmable with simplified C language
  • Supports 1-Wire and I2C (software)

This product integrates with all Australian certified (921.42MHz) Z-Wave controllers including:

Vera Edge - most popular sensors scales, switches and dimmers are supported
Fibaro Home Center 2/Lite - full support from 4.070 (some scales might not be supported)
Z-Way / RaZberry - full support

Manuals:

⇒ Z-WAVE.ME Z-Uno Technical Specifications

⇒ Z-WAVE.ME Z-Uno Power Supply Schematic

 

Click here to find a local or online retailer.

 

DHS Headquarters

office@dhsys.com.au

All enquiries: 1300+ZWAVE (1300 099 283)
from overseas +61 (3) 94 32 8000

Digital Home Systems Pty Ltd
3/143 Main Street,

Greensborough, VIC 3088, Australia
Reception: +61 3 94 32 8000


DHS Showrooms and Sales

Greensborough, VIC

Name: DHS headquarters
Street Address: Digital Home Systems Pty Ltd 3/143 Main Street
Office / Showroom opening hours: Mon – Sun: 9am – 5pm.
Phone Number: 1300+ZWAVE (1300 099 283)
Email: office@dhsys.com.au

Canberra, ACT

Name: Dev Nagarajan
Street Address: 127 Mabo Boulevard, Bonner, ACT-2914
Office / Showroom opening hours: Mon – Sun: 9am – 5pm.
Phone Number: 1300556130
Email: act@dhsys.com.au

Dunedin, NZ

Contact Name: Greg Angell
Street Address: 30 McBride Street, Dunedin, New Zealand-9012
Office / Showroom opening hours: 8.30-5pm
Phone Number: 03 4663030
Email: nz_dunedin@dhsys.com.au

Auckland, NZ

Contact Name: Mike Farrelly
Street Address: 3A Fremlin Place, Avondale, Auckland, New Zealand-1026
Office / Showroom opening hours: 7.30-4pm
Phone Number: 09 3071540
Email: nz_auckland@dhsys.com.au

Christchurch, NZ

Contact Name: Iri Tabulala
Street Address: 8 Lincoln Lane, Addington, Christchurch, New Zealand-8011
Office / Showroom opening hours: 8.30-5pm
Phone Number: 03 3650333
Email: nz_christchurch@dhsys.com.au