The Ultimate Installer Z-Wave Toolkit

The Z-Wave Certified Installer Toolkit

 

The Z-Wave Certified Installer Toolkit (CIT) is a tool for installers to test a Z-Wave network  prior to completion to ensure a robust, reliable mesh network is in place, and a powerful tool for troubleshooting and diagnosing problems. It may be left behind for logging or even permanent off-site maintenance.

 

DHS CIT

BUY Z-WAVE CIT TOOLKIT NOW

The Z-Wave Certified Installer Toolkit is a powerful, versatile tool for every installer:

  • Comprehensive Z-Wave network diagnostics & device management, accessible from anywhere in the world

  • Rapidly identifies potential problems

  • Spectrum analyzer shows noise in the Z-Wave channels

  • Routing table displays which nodes are neighbors

  • Network map graphically displays how nodes are connected to each other

  • Z-Wave network sniffer (Zniffer) will show what is actually sent by nodes and identify the type of message

  • Displays advanced node information such as device version, battery level, Z-Wave library version, and more

  • Access to Z-Wave device product information including manuals and technical data

  • The CIT may be left at a site for long-term testing allowing you to connect to it remotely

  • The CIT is Z-Wave Plus certified as a controller

  • As a fully capable controller it can set configuration parameters and communicate with all nodes on the network, including those using Z-Wave S0 and S2 security

  • The CIT is currently available in Australia/New Zealand 921MHz and HK 919.8MHz frequency groups

Please note that Z-Wave CIT Toolkit works with S2 Z-Wave Plus controllers e.g. FIBARO HC3 or HC2,

but is not supported be VERA controllers at this stage as VERA controllers are not S2 enabled.

Status

Type Info

Noise

Network

Interview

Neighborgs 

The CIT Toolkit documentation and Webinar: 

The Z-Wave CIT Toolkit quick start guide

The Z-Wave CIT Toolkit full product manual

Webinar: Z-Wave Network Diagnostics with Z-Way CIT Toolkit

DHS Headquarters

office@dhsys.com.au

All enquiries: 1300+ZWAVE (1300 099 283)
from overseas +61 (3) 94 32 8000

Digital Home Systems Pty Ltd
3/143 Main Street

Greensborough, VIC 3088, Australia
Reception: +61 3 94 32 8000

Contact Us Search for installer


DHS Showrooms and Sales

Melbourne, VIC

Street Address: Digital Home Systems Pty Ltd 3/143 Main Street
Office / Showroom opening hours: Mon – Fri: 9am – 5pm.
Phone Number: 1300+ZWAVE (1300 099 283)
Email: office@dhsys.com.au

Sydney, NSW

Street Address: 199 Parramatta Rd, Homebush West NSW 2140
Office / Showroom opening hours: Mon – Fri: 9:30am – 5:30pm.
Phone Number: 1300 886 233
Email: nsw@dhsys.com.au

Canberra, ACT

Street Address: 127 Mabo Boulevard, Bonner, ACT-2914
Office / Showroom opening hours: Mon – Fri: 9am – 5pm.
Phone Number: 1300556130
Email: act@dhsys.com.au

Dunedin, NZ

Street Address: 30 McBride Street, Dunedin, New Zealand-9012
Office / Showroom opening hours: Mon – Fri: 8.30-5pm
Phone Number: 03 4663030
Email: nz_dunedin@dhsys.com.au

Auckland, NZ

Street Address: 3A Fremlin Place, Avondale, Auckland, New Zealand-1026
Office / Showroom opening hours: Mon – Fri: 7.30-4pm
Phone Number: 09 3071540
Email: nz_auckland@dhsys.com.au

Christchurch, NZ

Street Address: 8 Lincoln Lane, Addington, Christchurch, New Zealand-8011
Office / Showroom opening hours: Mon – Fri: 8.30-5pm
Phone Number: 03 3650333
Email: nz_christchurch@dhsys.com.au